Doepfer A-183.3 from EMIS

Doepfer A-183.3 Amplifier
This page was last updated 31/10/2009

EMIS

Computer Interfaces

Drums & Percussion

Flightcases & Bags

MIDI Accessories

Mulitrack Recorders

Orchestral Instruments

Pianos (Home & Stage)

Portable Keyboards

Speakers & Guitar Amps

Synth Expanders

Synth Keyboards

Misc (Everything Else)

	A-183.3				Amplifier

					The A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximum amplification can be switched between 1, 2 and 4 (in position 1 the module does not work as a real amplifier but only as attenuator). The level can be adjusted by means of the Level control between zero and the chosen maximim amplification (1/2/4). Two overload LEDs indicate if the output signal goes beyond about +10V or becomes less than about -10V. Input and output are equipped with miniature 2-way multiples (parallel connected sockets). The main application of this module is to adapt differing audio or CV levels between different modules or systems. For example LFO, ADSR or Gate levels between modules of different manufacturers can be increased or attenuated. But even audio signals can be attenuated or amplified up to 4. But the module cannot be used as an amplifer for external low level audio signals (e.g. microphones or electric guitars) !
	Width 4 HP	Depth 20 mm	Current 20 mA		Preliminary prototype info only


	For any queries or problems accessing this site please email and let us know.
	Optimised for Explorer 6
	(C) 2000-2008 EMIS. No part of this web site may be copied, and all text is copyright. All trademarks recognized and belong to their respective owners. The EMIS logo is copyright and owned by EMIS, Bristol, UK.