|
|
|
A-177.2 |
|
External
Foot Controller II |
|
|
 |
|
Economically
priced module for connecting one foot controller and one double foot
switch for control A-100 functions by means of the feet. For example
the frequency of a filter or the loudness can be controlled by a
foot controller, but even other parameters like LFO frequency,
modulation depth, phasing, pitch or any other voltage controlled
parameter. The gate outputs controlled by the double foot switch can
be used e.g. to trigger an envelope generator or to start/stop a
sequencer. Even a single foot switch can be used if only one gate
signal is required. A special application of the A-177-2 is the
usage within a Trautonium replica (for details refer to the
Trautonium project article). The foot switches can be used to switch
the mixtures of the subharmonic oscillator A-113. The foot
controller can be used to control the overall loudness in
combination with a VCA. A-177 is compatible with the footcontrollers
FP5 and double foot switch VFP2 (see Accessories). The Foot
controller and double foot switch are not included with the module
but have to be ordered in addition. If you want to use another foot
controller or foot switch it has to be compatible to FP5 or VFP2. In
the user's manual of the no longer available module A-177 (
A177_man.pdf) you find the specification for these devices. If the
footcontroller FP5 is used the CV output range is about 0...+8V. The
gate output levels are 0/+12V in combination with the VFP2 (foot
switch not operated = 0V, foot switch operated = +12V).
|
Width
4 HP |
Depth
30 mm |
Current
10 mA |
|
A-177.2
Manual |
|
