|
|
|
A-174.2 |
|
Modulation
Wheels CV Source |
|
|
 |
|
The
A-174-2 is a modulation wheel module with two wheels. The factory
setting is a spring loaded wheel at the left side with bipolar
voltage output (i.e. 0V in center position, positive voltage in the
upper range, negative voltage in the lower range, voltage range
about -5.5 V ... 0V ... +5.5 V) and a wheel without spring at the
right side with positive voltage output (i.e. 0V in the lowest
position and positive voltage when operated, voltage range about
0...+8 V). For the spring loaded wheel a voltage "plateau"
around 0 V is preset (jumper) so that the output voltage is 0 V in a
small area near the center position. By means of jumpers the factory
settings can be changed. For each wheel two jumpers are available:
one for the voltage range (positive or bipolar) and one for the
voltage plateau around 0 V. If these settings are changed even the
wheels have to be re-adjusted mechanically. Therefore such
modifications should be carried out by a qualified person only. By
request the module is available from the factory even with two
wheels both with or without springs (additional charges Euro 10.00
for each change). |
Width
14 HP |
Depth
40 mm |
Current
10 mA |
|
manual
coming soon |
|
